Opti-myst Transducer (M011B)

This part is a Dimplex Opti-myst Transducer (M011B) for use with electric fires

For models this part fits and other relevant information please see the specification section below.

UK Spares only sells genuine Dimplex spares and as a result you can be confident of the quality you will receive when you receive your Dimplex Opti-myst Transducer (M011B). UK Spares also recommends that all technical work regarding the installation of spare parts such as the SP01/70852/0 are undertaken by a competent person.

If you are unsure if this part will fit your model please refer to the specification area below or contact our friendly team with your model information.

Reset Instructions If Required Below

Once you are in safe receipt of the new transducer, remove the old one and turn the fire off at the mains and leave this turned off. Fit the new transducer, ensuring this is sitting in its holder correctly and that the wire is plugged in and sitting in the groove provided. Please always ensure the transducer and the black ball float sitting on top of the transducer, are completely submerged by at least 5mm of water.

When you are satisfied with the positioning of the transducer, put the fire back together, but leave it switched off at the mains for 30 minutes. Then turn the fire on and we trust it will perform to your entire satisfaction.